High Quality And Reliable Baler Manufacturer
Any mechanical equipment need to maintain, if not will appear a lot of problem of maintenance, if encounter glitches, that is to say, their easy to get rid of, but if the encounter more difficult, that is a tragedy, therefore, we must in the usual time will begin to form a good habit, care more for our equipment, won't appear more maintenance of order. Also will not be in a hurry to find manufacturers to solve the problem at the critical moment, in order to customer work is not at the critical moment to drop the chain, does not affect the normal work. Aupwit will now motor recycling machine maintenance methods to teach you, I hope you can learn to use.
Motor recycling machine is at the machinery co.LTD adopts the high and new technology research and development and the use of motor recycling equipment, this equipment has low energy consumption, high efficiency, low noise, big handling capacity, etc, therefore recognised by the masses of users, now to introduce the equipment start the matters needing attention and maintenance methods:
Let's start with the device startup considerations:
Before starting the motor recycling machine:
1. Make sure that no one works on the motor recycling machine and the equipment it carries, the motor body is clean and tidy, and there is no sundries in the surrounding area (no woven bags, plastic bags and other items that can easily block the air duct of the motor).
2. Conditional as far as possible to move the coupling, to confirm that the motor and the equipment with no sticking phenomenon.
3. Place the main command controller (switch) of the field control motor in the "run" position.
When the motor recycling machine is started:
1. pay attention to whether there is abnormal noise, the current is stable.
2. There is no difference in vibration.
3. After use: clean up after each use.
Maintenance method:
1. Pay attention to the frequent observation of the instrument instructions, abnormal, should be stopped in time, to repair the equipment, troubleshooting, before the cause is not found, the fault is not eliminated, should stop the motor recycling machine operation.
2. Always check the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and pay attention to check the tightness of the whole machine. It is found that the lack of oil and water is too much in the inspection, and should be added and analyzed the reason.
3. Keep the motor recycling machine clean, timely adjust and tighten the loose parts, in case of loosening aggravate the wear of parts or lead to the loss of parts.
4. Check and adjust the motor recycling machine well, and pay attention to the replacement of oil.
The above startup and maintenance methods should be kept in mind. In addition, we should pay special attention to the places of some motor recycling equipment parts. Some relatively subtle places are easy to be ignored, but they often play a key role. Therefore, we should do a comprehensive inspection of those relatively hidden and subtle parts when we do our usual maintenance work.
Aupwit specializing in the production of motor recycling machine in line with customer needs, low price, good quality, high quality, you are welcome to buy!
