Safety Rules And Features Of Metal Baling Machine

Metal baler machine for milling of steel, industry involved in ferrous metal smelting, industry involved in recycling and nonferrous metal.

It can be used for baling several kinds of steel, metal scrap, copper scrap, aluminum scrap, and other similar extrusions to cylindrical, rectangular, octagonal, or any other kind of shapes that can reduce smelting and transportation cost.

However, buying a high-quality metal baler machine is important to properly process your metal scraps, and it is much possible to obtain such a baler from a reputable metal scrap baling machine manufacturer.

Some features of the baler machine

· It makes use of a hydraulic drive. Although, Automatic PLC control and manual control operation are accessible for usage.

· Installation without foot screws, in the absence of power, can be equipped with a diesel engine for power.

· The block out a type that is baled can be either push out forward, turn out from the side, or out in the front way.

· The force required in pushing of eight grades starts from 63 tons to about 400 tons with the efficiency of 0.5 tons per hour to 20 tons per hour.

· The size of the feeding box and the volume of the bale may be readjusted based on the specifications of raw material the user wants.

Applications of metal baler machine

The metal baler machine can be applied on various scraps like coppers, scrap casting steel, aluminum windows.

Also, it can be used for other materials such as aluminum cans, non-ferrous metals, steel wire, tin cans, aluminum sheets, steel shavings, and many other metals.

Some hydraulic metal scrap baling press safety rules

· Before the operation of the machine, ensure that you wear a tight-fitting safety cloth, a jacket with hem that the cuffs cannot be opened.

· Also ensure you don not start the machine when you have a wear clothes on you to prevent twisting or injury from the machine.

· Ensure you put on helmet. Also, braids must be kept inside your cap. Ensure you are not wearing slippers or skirts.

· Regular examine the oil tank, pipes, hydraulic unit and other necessary parts.  

· The operator should take note of safety package. So, when packaging, the hydraulic level must be pushed to a proper place to avoid hydraulic flow and blockage of oil flow.

· After the packing of all hydraulic rod have been done, retraction of the hydraulic cylinder must be established to avoid oil spill and damages of seals.

· Maintenance of local pipelines should be done by checking for oil spills and repairing those damaged areas.

· Avoid any form of abnormal operations.

· There should be filtering of the oil tank and the tank must be cleaned within six month intervals.

Are you interested in buying metal baler machine?

Most people’s dream when they want to go into scrap business is how they can get a high-quality machine with good efficiency. This can make some people go through stress while looking for high-quality machine. Meanwhile, to get a high-quality baler machine is difficult when you know a reliable metal baler machine manufacturer. Therefore, you can kindly contact us today.