High Quality And Reliable Baler Manufacturer
Balers are machines that compress and bind materials into bales or compact shapes. And doing this makes the materials easy to be stored, recycled, or transported.
Metal balers have several applications such as steel mills, metal processing, and metal smelting.
They are used to reduce metal scrap into bales in order to reduce storage space or transportation costs.
You do not have to go outrageously above your budget as you can get cheap metal balers.
It is also imperative for you to purchase your metal balers from reliable and experienced manufacturers who can deliver quality to you.
In this article, we will discuss some tips and components to look out for to help you in the process of selecting the best metal baler, even if it is a cheap metal baler.
1. Examine the machine body
There are components to look out for in the machine body such as:
a. The welds
The welds placed at the stressed area of the steel plate should ideally be beveled at an angle of 45 degrees.
There should not be any welding slag residues, and the welds must be level with no rosin joint.
b. Steel plate
The stability and safety of the metal baler are determined by the thickness of the steel plate.
On the different stressed areas of the metal bar, we can adopt steel plates with varying thicknesses.
Also, the most stressed area adopts the thickest rib plate with the largest density.
c. Lining plate
There are assembled lining plates with hardness inside the baler, to protect the baler from abrasion. This is to prolong the service life of the metal baler.
2. Check the bale shape
The metal baler typically has three different bale shapes namely; octangle, cylindrical, and cuboid.
The cuboid bale is the most common of all the shapes, also it is slightly restricted to the furnace mouth. It is the cheapest, while the cylinder type is the most expensive.
3. Check bale out the type
There are three bale out types that the metal baler has
i. Turn-out is the most common type and the first choice for smaller metal balers.
ii. Side-out – this is majorly used for large metal balers
iii. Front-out – although this one has a large bale, its density is not high, it is best suited for light materials such as aluminum cans.
4. Consider press chamber size
The press chamber of the metal baler typically has a fixed dimension.
However, if you hire an experienced manufacturer you can get a customized size for specific storage and transportation requirements.
This can come on your on request and on a friendly budget too.
5. Examine hydraulic station
It is the hydraulic station that provides power for the baling press. If you want to buy a metal baler, start the machine and listen for loud noise.
Also, ensure that the oil tank is clean and that there are no welding slag residuals.
Conclusion
Metal balers provide high economic and environmental value because they increase work efficiency.
Similarly, they also help in waste reduction thereby benefitting the environment. You can get a cheap metal baler that will provide long-lasting value for you.
And as mentioned earlier, you should ensure to purchase yours from a reputable, reliable, and experienced metal baler manufacturer.
Doing this will help you have the best value for your hard-earned money when investing in a cheap metal baler.
