The 4 Revolutionary Stages Of Electric Motor Recycling Machine

The motor recycling machine is productive and advantageous. It is used in cutting copper from the stator and process different motor stators with an outer diameter of 8-30cm.

To start the process of cutting, an electric motor recycling machine will first be used to cut the stator that is motor into half and gradually remove every of the internal copper.

Also, the electric motor recycling machine is strongly comprised of a hydraulic control system, tangential cylinder, pull cylinder, electronic control system, and hydraulic pump.

Most importantly, motor recycling machine performance is high and it is easy and convenient to use. In fact, a motor recycling machine hot sale is the best in the market.

It uses a hydraulic system with a regular disassembly function that effectively improves disassembly efficiency and brings down labor intensity.

Furthermore, the motor recycling machine is set up with an automatic thread gripping device that wonderfully brings down the labor intensity in the process of operation.

Its cutting blade is made of high wear-resistant hard alloy that is very easy to handle, reliable, fast cutting and it does not produce adhesion and burrs.

In addition, the cutting blade and the gripper can be used to adjust the reciprocating distance, which is more conducive to the placement of the stator coil.

Well, for your best copper cutting operation purchasing an electric motor recycling machine from a reliable and reputable manufacturer is the most recommended option for the best electrical and motor parts cutting.

Components of electric motor recycling machine

Electric motor recycling machine has various components which are explained below ;

1. Stator cutting panel

The space used for stators cutting is equipped with two pieces blades which include one shape to cut stators and another flat to cut motor out-shell

2. Blade

The blade material is GR12, the blade services life is two years.

3. Electric control panel

It has control cutting panel and pulling panel.

4. Copper coil pulling the panel

The position used for copper coils pulling is three-set claws which include 2 claws, 4 claws, and 6 claws

Motor stator recycling machine Flow Chart

The following explains how copper is cut and pull out.

Cutting part

You need to make the blade cut along stators copper coil and thereafter use the pulling parts or extracting parts to grab the copper out.

Pulling part

You will need to make cut stator install on pulling part then grab the copper by claw, this part is majorly used for pulling small size stator.

Operation steps of Motor stator recycling machine

The following are steps you take to operate electric motor recycling machine

Step1:

 Check device connection and power then press switch.

Step2: Cutting part:

You will allow the blade cut along with the stator copper coil side then use pulling parts or extracting parts to grab copper out.

Step3: Pulling part:

Make cut stator installed on pulling part then grabbing copper by a claw.

4 Revolutionary Stages Of Electric Motor Recycling Machine

The electric motor recycling machine has 4 revolutionary stages which are built into one single machine. This is explained below

Stage 1: The case cracking stage.  

The electric motor recycling machine can wreck the aluminum, cast iron motor housing, and remove the anchor/rotor points on scrap electric motors.

Stage 2: The second stage is the stator cutter

This is capable of cutting transformer blocks into 2 equal parts.  Once the stator is cut in half, it will be very easy to extract the copper windings from the Scrap electric motors or transformers.  In fact, the electric motor recycling machine can be used for processing old transformers.

Stage 3: 

The third stage of the scrap motor recycling machine is separating the iron and copper of the stator by means of a sophisticated hydraulic operation with grip claws.

Stage 4.  

This stage is unique to the motor recycling machine is the secondary grip arm which allows for the easy removal of residual copper windings remaining on the stator.  This feature ensures no copper is left unclaimed.

Conclusion

Motor recycling machine is a robust machine which is produced using Schneider

Electrical Components. It is composed of many features which makes it durable and efficient

Difficult electric motor stators can be quickly recycled with this machine. It is used to cut copper from the stator and process different motor stators.

Motor recycling machine hot sale is ranging in the markets as the suppliers are giving the best price offer.

Electric motor recycling machine is considered to give safety operation, it is easy to relocate with included Forklift channels and its spare parts are widely available in the market.

However, whatever your choice of motor recycling machine may be, it is ideal to buy them from a trusted manufacturer. Doing this, you are assured of a great deal.