High Quality And Reliable Baler Manufacturer
Shearing machine is a kind of machine tool, which adopts hydraulic drive, reliable safety performance and convenient operation. There are eight grades of shear force from 63 tons to 400 tons, suitable for users of different scales and different requirements. No foot screws are required for installation, and diesel engines can be used as power where there is no power supply.
The shearing machine is suitable for metal recycling processing plants, scrap car dismantling plants, smelting and casting industries, cold shearing, pressing and flanging of various shapes of steel and various metal materials, as well as powdered products, plastics, glass steel, insulation Material and rubber compression molding.
Product Introduction
Shearing machine is a kind of mechanical equipment used to cut metal materials. In the rolling production process, after rolling large-section steel ingots and billets, the section becomes smaller and the length increases. In order to meet the requirements of subsequent processes and product size specifications, various steel production processes must have a shearing process.
Use
The purpose of the shearing machine is to cut to length, cut the head, cut the tail, trim the edge, cut the sample and cut off the local defects of the rolled piece, etc.
Shearing machine is one of the important auxiliary equipment in steel rolling machinery, because the capacity of the shearing machine directly affects whether the production capacity of the rolling mill can be fully utilized and the balance of the metal process of the rolling production line.
Shearing machines are also widely used in machinery manufacturing and repair departments.
Features
(1) The motor adopts programmable controller as required;
(2) The hydraulic system adopts advanced cartridge valve or slide valve system control, and implements a hydraulic press with button centralized operation;
(3) Its pressure, speed and stroke can be adjusted according to process needs, and can complete two process methods of compression molding and finalizing.
Precautions
(1) Those who do not understand the structure, performance and operating procedures of the machine shall not start the machine without learning.
(2) Each lubrication point of the machine should be filled with lubricating oil at least once per shift.
(3) The hydraulic oil added to the oil tank should be strictly used high-quality anti-wear hydraulic oil, which must be strictly filtered, and sufficient oil should be kept frequently, and the oil should be filled immediately when it is insufficient.
(4) The fuel tank should be cleaned and replaced with new oil every six months, but the first cleaning and filtering of the oil should not exceed one month, and the new oil that has been used once is strictly filtered and allowed to be used again.
(5) When there is a serious oil leak or an abnormal phenomenon occurs during work, stop immediately, analyze the cause and eliminate the fault, and do not force the operation with disease.
(6) During the operation or packing process of the shearing machine, it is not allowed to repair or touch the moving parts with hands, and it is strictly forbidden to press materials in the bin with hands or feet.
(7) The adjustment of pumps, valves, and pressure gauges must be carried out by experienced skilled workers. If the pressure gauge is found to be faulty, the gauge should be checked or updated immediately.
