High Quality And Reliable Baler Manufacturer
With the enhancement of environmental protection awareness in modern society, it has played a great role. Some waste can be reused, and it is becoming more and more popular. The vertical baler is one of the main products of our AUPWIT Industrial Company. In the modern packaging industry, there are more application domains involved. Today, let the editor of AUPWIT Industrial carry out the vertical baler A brief introduction.
Vertical baler is used to squeeze the core of waste paper and similar products under normal conditions, and use packaging tape to pack it into shape, so that its volume is greatly reduced, so as to reduce transportation volume and save freight. The purpose of increasing efficiency.
The vertical balers produced by our AUPWIT Industrial Company use all stainless steel materials, which are simple and generous in appearance; reasonable in structure and more advanced in technology. The use of this vertical baler can save stacking space, reduce transportation costs, and is beneficial to environmental protection.
However, various mechanical equipment often encounter various problems after purchasing, such as how to operate, and related precautions. For the vertical baler, the hydraulic principle should be used to compress the resources. Although it seems simple, certain methods and steps need to be mastered in the use process.
The specific usage method is as follows:
1. String the packing rope through the automatic tensioning device behind the packing machine, and place it along the strapping groove, then tie the strapping to the bottom end of the packing groove, rotate the automatic tensioning device 90 degrees, and close the bottom door lock live.
2. Put in the material, when the material is loaded to the height of the platen, close the door and press the "down" button. The equipment runs automatically and is compacted. The feeding height of materials other than cardboard can only be slightly higher than the bottom door.
3. The pressure plate moves down and compresses to reach the maximum pressure and automatically returns to the fully open position. When compressing and packing constraints, the pressure plate stops at the preset position of the compressed material.
4. Open the door of the device and put the tie rope through the bottom slot from front to back and back to the front through the pressure plate slot, then pull the tie rope tightly and knot it by hand. Push the packing rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "up" button, the return stroke of the cylinder will automatically turn out the bundled bales. It is not allowed to stand in front of the door when opening the door, so as to avoid accidental injury when the door bounces.
5. After the bale is ejected, reset the bale lever to press down. Finally remove the bale, close the door and lock it to enter the next packaging cycle task.
The above is our AUPWIT industry's related introduction to the vertical baler. If you want to learn more about the relevant knowledge, please log in to our website and leave a message. Thank you!
